Innovative NV9 Page 27 Operation Manual Download

Page: 27 / 41

11 SUPPORT TOOLS

The following support tools are available for use with the NV9 Bank Note Validator:

•

ITL Bank Note Validator Currency Manager Software.

•

Validator Programming System (DA3)

•

Downloads from the Innovative Technology Ltd website: www.innovative-

•

E-mail Support via [email protected]

NOTE: The Validator must be in SSP mode when connected to a computer and then returned to the

original Settings when complete

11.1 ITL BANK NOTE VALIDATOR CURRENCY MANAGER

The IT

er software offers the following functions:

•

prepared currency data via the DA1 or

irmware version and currency set already loaded on an NV9 unit.

•

Adjust the channel and pulse configuration on a pre-programmed NV9 to yo

requirements.

•

Download a new version of firmware onto the NV9.

•

Use diagnostic functions to check Validators operation (firmware version 3.15 and

greater only).

ill run on an IBM compatible Personal Computer with Pentium™ processor or

e Appendix F for operating system requirements) and requires a DA1 kit fitted

to the serial port or DA2 kit fitted to the USB port. (See Appendix C)

11.2 VALIDATOR PROGRAMMING SYSTEM (DA3)

The DA3 is a programming system designed to enable the programming of ITL Bank Note

Validators in the field without the use of a PC.

programmed the user can:

ate the existing software within a validator to the latest versions using the BNV

Match Download function.

•

Overwrite the existing software within a validator with pre-selected (Tagged) files

using the BNV Override Download function.

•

Test the fun

chine.

ual

ments. The address is

technology.co.uk

L BNV Currency Manag

Program the Validator by downloading pre-

DA2 kit.

•

Check the f

ur own

The so tware w

equivalent (se

Once the DA3 has been

•

Upd

ctionality of the validator away from the Host ma

ils please refer to the DA3 User Man

For full DA3 operation and functionality deta

(Document number GA339).

11.3 INTERNET WEBSITE SUPPORT

The Innovative Technology Ltd website provides the means to download new and updated

currency sets and new versions of firmware for the NV9. You can obtain these along wi

technical bulletins by visiting www.innovative-technology.co.uk

11.4 E-MAIL SUPPORT

If the data you require is not available over the Internet Innovative Technology supports an e-
mail system to help customers with unusual require
[email protected]

NV9 Operations Manual 27

Summary of Contents for NV9





































Search results

Summary of Contents for NV9

Reviews:

Related manuals for NV9

Brands by name

Popular brands

Innovative NV9, Operation Manual

Search results

Summary of Contents for NV9

Reviews:

Related manuals for NV9

Brands by name

Popular brands