Innovative NV9, Operation Manual

Page: 17 / 41

Copyright Innovative Technology Ltd 2008 GA326-6
Example transactions are shown below (see table 9):
ocols
6.5 SERIAL INPUT/OUTPUT – SI2 (BAUD RATE IS DEFAULTED TO 9600)
aud rate used and the data format.
d Example protocols are the same as in
and 9 above)
Table 9 – Example prot
This mode is identical to the SIO mode detailed in chapter 7.4 with the exception of the
B
•
Only 9600 baud rate is available.
•
Inhibit 2 has no function.
•
All Transmit and Receive codes an
Chapter 6.4 (See tables 8
The data is formatted as follows:
Event Validator Decimal Value Host
Note entered into validator Validator Busy 120
Note accepted channel 2 Validator Ready 121
Accept on channel 2 2
Note entered into validator Validator Busy 120
Note not recognised Validator Ready 121
Note not recognised 20
Validator has returned note Validator Ready 121
Software Inhibit Channel 4 Inhibit C4 134 Inhibit C4
Channel 4 inhibited 134
Software Enable Channel 4 Uninhibit C4 154 Uninhibit C4
Channel 4 inhibited 154
Status Report 182 Status Request
Status Requested 182
3 byte status message Inhibit status Channels 1-8 Byte 1
Inhibit status Channels 9-16 Byte 2
Escrow On (=1) / Off (=0) Byte 3
Turn on Escrow Mode 170 Enable Escrow
Mode
Escrow Mode Enabled 170
Note accept in Escrow Mode
Note entered into validator Validator Busy 120
Note Accepted Channel 2 Validator Ready 121
Accept on Channel 2 2
172 Accept Note in
Escrow
Accept Escrow 172
Accept on Channel 2 2
Request firmware version
Firmware requested
4 byte ascii string
192
192
0321(ascii)
Request
Request dataset code
Firmware requested
8 byte ascii string
193
193
EUR02901(ascii)
Request dataset
1-start bit, 8-data bits, 1-stop bits, 9600 baud.
NV9 Operations Manual 17