Copyright Innovative Technology Ltd 2008 GA820-1
Notes:
• The Bill acceptor must be set to Programming Mode (SSP) when connected to a computer or
the BV50 from operating in the host machine.
ITL BNV Currency Manager 3.2.2 or higher must be used to access the BV50 functions
Test the functionality of the bill acceptor away from the host machine.
ity details please refer to the DA3 User Manual
nfiguration Card must be used after re-programming if a different
with all none serial communication protocols to reduce the
ins in this state until a bill is entered (Time A). Following a bill insertion
e BV50 returns to Low Power mode approximately 1 second after the Busy line goes High
ime B).
rds or via
to
mode.
DA3 (See Chapter 4.2.3 - Configuration Button Functions).
• The programming mode can only be cancelled by re-programming with a Configuration Card
or via the Validator Manager program. Please ensure you are aware of all the BV50
g will stop
programmed settings before entering this mode. Failure to restore the original settin
•
5.3 VALIDATOR PROGRAMMING SYSTEM (DA3)
The DA3 is a programming system designed to enable the programming of ITL Bill Acceptors
in the field without the use of a PC.
Once the DA3 has been programmed the user can:
• Update the existing software within a bill acceptor to the latest versions using the BNV
atch Download function.
M
• Reprogram the bill acceptor to accept a different currency using the BNV Override Download
function
•
For full DA3 operation and functional
(Document number GA339).
When programming a BV50 using the DA3 BNV Override Download function, the firmware
interface is unchanged. A Co
interface is required.
6 LOW POWER OPTION
ow power Mode can be used
L
power consumption of the BV50 when idle in Parallel, Pulse and Binary Interfaces.
The BV50 goes into low power mode approximately 6 seconds after the bill acceptor is
owered up and rema
p
th
(T
NOTES:
• Low Power Mode can ONLY be used with Parallel, Pulse and Binary protocols
• Low power mode can only be enabled by correctly completing the configuration ca
the ITL BNV Currency Manager software
• In low power mode the front sensor is checked every 1 second which can lead to a delay in
accepting the bill when it is presented
• Configuration button functions are only available during power up before the BV50 goes in
low power
BV50 Operations Manual 17
