Copyright Innovative Technology Ltd 2008 GA820-1
16
15
1
2
4.2.2 INTERFACE PIN DETAILS
The function of pins 1-8 changes according to which machine interface is
being used. See the i
ndividual interface descriptions for details.
Figure 3
– BV50 Cable connections
Pin
Name
Type
Description
1
Vend 1
Output
2
Vend 2
Output
3
Vend 3
Output
4
Vend 4
Output
Open collector outputs. Function changes
depending on machine interface protocol (see
individual interface descriptions for details)
5
Inhibit 1
Input
6
Inhibit 2
Input
7
Inhibit 3
Input
8
Inhibit 4
Input
Inputs are held high to in5V via 10K
Ω
.
Fu
e
nction changes depending on machine interfac
protocol (see individual interface descriptions for
details)
9
Busy
Output
Active LOW when the BV50 is transporting, reading
or stacking a note
10
Escrow
Input
Enable the es
lding LOW in
crow function by ho
Parallel, Pulse or Binary modes (See Appendix E –
Escrow Function)
11
-
-
Do not connect
12
-
-
Do not connect
13
Factory Use Only
Do not connect
14
Factory Use Only
Do not connect
15
+Vin
Power
Nominal 12V DC supply
16
0V
Ground
0V supply
Table 6
– 16 way External Conn
t
4.2.3 CONFIGURATION BUTTON FUNCTIONS
he functions available via the Configuration Function Button are detailed in Table 7 -
Table 7
– Configuration Button Functions
ector Pin Ou
T
Configuration Button Functions
Configuration Button
Power Status
Function
Press & Hold (>2 secs)
Sets BV50 to Programming
Powered ON
Mode (SSP)
Press Once (<1 sec)
Powered ON
Enables Configuration Card
Programming
Press twice (within half a second)
Powered ON
Current Setting Indicator
Press & Hold (as power is applied)
Powered OFF
Resets ccTalk key to Default
→
ON
setting
BV50 Operations Manual
9
