NV10 Operations Manual – GA333-3
5 of 38
© Copyright Innovative Technology Limited 2005
2: Scope of Document
This document is intended for those whose will:
•
Design the NV10 into items of equipment.
•
Build equipment using the NV10.
•
Install equipment containing the NV10.
•
Maintain equipment containing the NV10.
Although information is included which will allow a degree of fault diagnosis and repair, it is recommended
that for all but simple mechanical repairs the unit be returned to an approved service centre for repair.
Caution
:
•
Never exceed the recommended environmental and electrical limits.
•
Do not attempt to lubricate the mechanisms as this may affect the note transport.
•
Do not polish the lens as this may alter the optical characteristics.
•
If the NV10 Validator is disassembled the unit must be re-calibrated/re initialised, following re-
assembly.
Innovative Technology Ltd has a policy of continual product improvement. As a result the products supplied
may vary from the specification described here.
