innovair Oasis WOE10C2DB1 / HOE10C2MR83, Service Manual

Page: 42 / 52

40
For other models:
T1-Ts Running mode
T1-Ts 2 Cooling
-1 T1-Ts +2 Fan-only
T1-Ts -1
Heating (For cooling only model, it will run at Fan-only mode)
Indoor fan will run at auto fan of the relevant mode.
The louver operates same as in relevant mode.
If the machine switches mode between heating and cooling, the compressor will keep stopping for 15
minutes and then choose mode according to T1-Ts again.
If the setting temperature is modified, the machine will choose running function again.
8.4.6 Forced operation function
Press the touch button continually, the AC will run as below sequence:
Forced cooling mode:
The compressor and outdoor fan keep running and the indoor fan runs at low speed. After running for
30 minutes, AC will turn to drying mode (AC will turn to auto mode for 21k,22k,24k models) with 24
setting temperature.
Forced auto mode:
The action of forced auto mode is the same as normal auto mode with 24 setting temperature.
When AC receives signals, such as switch on, switch off, timer on, timer off, mode setting, fan
Speeds setting, sleeping mode setting, follow me setting, it will quit the forced operation.
The forced operation function can not be memorized if power off.
8.4.7 Timer function
8.4.7.1 Timing range is 24 hours.
8.4.7.2 Timer on. The machine will turn on automatically when reaching the setting time.
8.4.7.3 Timer off. The machine will turn off automatically when reaching the setting time.
8.4.7.4 Timer on/off. The machine will turn on automatically when reaching the setting “on” time, and