Innova Srl
Page 31
N420740A _manuale-SLC+ 2022
multi_EN_Rev.01.docx
7.2
GENERAL CLEANING OF THE UNIT
It is advisable to occasionally check and, if necessary, clean the fans, the
condensate drain and the internal walls of the unit. These operations must only be
carried out by qualified personnel (installer).
To carry out the above operations, proceed as follows:
•
disconnect the unit from power supply
•
in case of ceiling installation, disconnect the condensate drain pipe;
•
open the unit cover by releasing the screws on it;
•
check and if necessary clean the fans, the condensate drain and the
walls;
•
close the cover and lock it with the fixing screws;
For cleaning, you can use a vacuum cleaner, a rag dampened slightly with water,
a soft bristle brush or a low pressure compressor.
Attention!
There are small metal clips on the blades for balancing the blades, DO
NOT remove them.
Attention!
Avoid blowing high pressure compressed air on the battery; the
aluminum fins could be compromised and damaged;
Unit views for general cleaning