Innova Srl
Page 15
N420740A _manuale-SLC+ 2022
multi_EN_Rev.01.docx
4.2
POSITIONING AND CONNECTION PROCEDURES
The hydraulic connections are located on the side of the
unit.
The connections are with Eurokonus ¾ ”male thread.
Respect IN as the water inlet to the unit and OUT as the
water outlet from the unit.
Connect the pipes with a Eurokonus threaded fitting and
tighten it with dedicated tools;
The external thread is connected through a swivel fitting to
the battery to prevent rotation in the tightening from
damaging the internal pipes;
In any case, be careful not to rotate or twist the pipes
coming from inside the unit;
Rotating the pipes during connection could damage the
connections inside the unit and cause water leaks during
operation;