background image

2

Innova S.r.l

This booklet, code N273027C - Rev. 00 - (01/17) consists 
of 20 pages.

Compliance

We would first of all like to thank you for having chosen one of our products.

We are sure you will be happy with it because it represents the state of the art in the technology of 
home air conditioning.

By following the suggestions contained in this manual,  the product you have purchased will operate 
without problems, giving you optimum room temperatures with minimum energy costs.

The pictograms in the next chapter provide the necessary 
information for correct, safe use of the appliance in a rapid, 

unmistakable way.

Symbols

U

 User

Refers to pages containing instructions or information 
for the user.

I

 Installer

Refers to pages containing instructions or information 
for the installer.

S

 Service

Refers to pages containing instructions or information 
for the CUSTOMER TECHNICAL ASSISTANCE 
SERVICE installer.

Editorial pictograms

Safety pictograms

  Warning

It indicates actions that require caution and a suitable 
preparation.

 Prohibition

-   Refers to prohibited actions.

This unit complies with the following European Directives:
•  Low voltage 2014/35/EU
•  Electro-magnetic compatibility 2014/30/EU
•  Use restrictions of hazardous substances in electrical 

and electronic equipment 2011/65/EC (RoHS2)

•  Waste electrical and electronic equipment 2012/19/

EC (WEEE). 

• 

Energy consumption indication on the labels of energy-
related products 2010/30/EU 

• 

ErP Directive 2009/125/EC and regulation 2012/20EC

Summary of Contents for 10 HP DC





















Reviews: