6
S
I
U
USER MANUAL
Key/Display
Operation
Switching the appliance on and off
It is possible to switch the appliance on or off (stand-by) by pressing the specific button. The control system of the
appliance is equipped with a memory, so settings will not be lost if the appliance is switched off or in the power supply
is cut. This key is used to activate or deactivate the appliance for short periods of time.
In case of long periods of inactivity, the appliance must be deactivated by disconnecting either the main switch or
the plug from the socket.
Well-being button (economic automatic mode)
By choosing this mode on the appliance, it sets the best level of comfort in the room. The conditioner selects the mode
automatically (cooling or heating) according to the temperature set and ventilation speed according to the temperature
of the room.
Cooling only mode
•
In this mode, the appliance dehumidifies and cools the room.
•
It is possible to set the desired temperature between 16 and 31°C and, if this temperature is lower than the room
temperature, the compressor starts up after three minutes (maximum) and the appliance starts dispensing cool
air, maintaining ventilation active even if the setpoint has been reached.
Dehumidification only mode
In this mode, the appliance dehumidifies the room. Selecting this mode is useful during mid-seasons, i.e. on days (e.g.
rainy ones) when the temperature is pleasant, but excess humidity causes discomfort. This mode ignores both room
temperature and ventilation speed settings.The latter is always set to a minimum. It is normal for the appliance to work
intermittently.
Ventilation only mode
By selecting this function, the compressor is never activated and the appliance does not affect either room temperature
or humidity. IT IS possible to choose the speed of the fan
Heating only mode
•
In this mode, the appliance heats the room.
Set on heating only mode, the appliance periodically defrosts the evaporator coil, if necessary. During this phase,
the conditioner does not dispense warm air, even if its internal components are on, except for the room fan.
•
It is possible to set the desired temperature between 16 and 31°C and, if such temperature is higher than the
room temperature, the compressor starts up after three minutes (maximum) and the appliance starts dispensing
warm air.
Nocturnal well-being button
While the appliance is on in the selected cooling or heating mode, it is possible to choose different functions by
pressing the button in order to maximise noise reduction, energy saving and nocturnal well-being regulation.
In this mode, ventilation is set on minimum speed.
This mode should be activated right before going to sleep.
•
In cooling mode, the set temperature is increased by 1°C after one hour and by another degree after two. After
the second hour, the temperature is no longer changed and, after six hours, the appliance is put in stand-by.
•
In heating mode, the set temperature is lowered by 1°C after one hour and by another degree after two. After the
second hour, the temperature is no longer changed and, after six hours, the appliance is put in stand-by.
This function is not available for dehumidification only, ventilation only and economic automatic modes and can be
excluded any time (ideally once awake) by pressing the button again.
If the Timer has also been set, the appliance will turn off at the set time.
Control of air flow direction
By pressing the specific button, it is possible to either select the continuous oscillation of the mobile air outlet flap - in
such case, the symbol on the display is lit - or to block it in any position.
IMPORTANT: The mobile flap must never be moved manually. In cooling and dehumidification modes, the position
of the flap is reset every 30 minutes to prevent dew from forming.