background image

13

S

I

U

2.1 

EN

USER MANUAL

INNOVA APP OPERATION

Minimum system requirements

1.  The download and installation of the App depends on 

some system requirements of your smartphone. 

2.  For Android smartphones, the minimum version is 

4.1.1 

3.  For Apple smartphones, the operating system must 

be IOS 8.0 or higher. 

Figure 2-1

Press the button as shown in the figure to start 
the automatic procedure for the recognition and 
WIFI connection on the Innova 2.0 network. (only 
on Android devices).
If the automatic procedure does not start, it can 
be configured manually as indicated below.

On the first screen it is possible to select the 
language preference and the way the push 
notifications are handled.

If you check the notification box, the alarms will 
appear on your smartphone. 

Figure 2-2

2.2  Installing and using the APP

1.  From the application menu on your smartphone, find 

and open the "play store" icon. 

2.  Once you have logged into the store, search for 

InnovApp DuePuntoZero 

3.  Once you have found InnovApp 2.0, download the 

App and install it following the wizard. 

4.  Open the App. Once open, the screen in Figura 

2-1will appear

Summary of Contents for 10 HP DC





















Reviews: