manualshive.com logo in svg

Innov Interlude 500, User Manual, Page: 42 / 91

Share
Download
Innov Interlude 500 User Manual Download Page 42

19P03-DOC01E REV-3 

43 

WARRANTY AND RETURN POLICY 

 

  Limited warranty 

Rotec International warranty to the original purchaser of bed VersaTech 1100 ULB, offers 
the following protections: 

▪

1 year on manufacturing defects and on the accessories.

▪

2 years on motors and electronic components;

▪

10 years on the frame;

The warranty coverage begins from the date of purchase of the device and no employee or 
representative  of  Rotec  International  is  authorised  to  change  this  warranty  in  any  way 
whatsoever. 

This  warranty  does  not  cover  damages  caused  by  negligence  or 

inappropriate  use.    Rotec  International  will  not  be  held  responsible  for  any  other 
warranty  offered  by  any  person,  firm  or  company,  to  the  exclusion  of  the  one 
stipulated  above.

  Rotec  International  reserves  the  right  to  substitute  equal  or  superior 

quality materials during repairs and/or replacements.  The material replaced and covered 
by this warranty does not allow one to benefit from a new warranty.  It only benefits from 
the original warranty.  

The warranty on the bed and / or its accessories does not apply to damages resulting from 
modification and / or unauthorised additions or installation of accessories other than those 
authorised  by  Rotec  International.  Use  only  replacement  parts  supplied  by  Rotec 
International. 

For further information,  contact  our technical  services.  Our hours of operation are  from 
Monday to Friday from 8h30 to 12h00 and 13h00 to 17h00 local time.  

WARNING ON WARANTY 

▪

Any  changes  to  the  device  without  the  authorisation  of  Rotec  International  may

lead 

to 

SERIOUS  INJURY  AND  /  OR  IMPORTANT

MECHANICAL  DAMAGE  AND  COULD  LIMIT  OR  CANCEL
THE PRODUCT WARRANTY

.

Summary of Contents for Interlude 500




























































































Reviews:

No comments