5
EN
EAP-QUAD-11 / Version 181008 / www.innotech.at
3
SAFETY INSTRUCTIONS
3.2
FOR FITTERS: FOR SAFE ASSEMBLY
3.3
FOR USERS: FOR SAFE USE
If uncertainties arise during installation, it is imperative that you contact
the manufacturer.
-
All stainless steel bolts must be greased with a suitable lubricant before installation
(included: Weicon AntiSeize ASW 10000, or equivalent).
-
Ensure that stainless steel does not come into contact with swarf or steel tools,
as this may lead to corrosion.
-
Document the professional attachment of the fall protection system to the building
structure with dowel logs and photos of each fitting situation.
-
The fitters must ensure that the substructure is suitable for fastening the anchorage
device. If in doubt, consult a structural engineer.
-
The roof covering must be properly sealed in accordance with applicable guidelines.
-
The minimum free space necessary under the edge is calculated as follows:
Deformation of the anchorage device in the event of Manufacturer's
specification of the personal protective equipment used including deflection of the
cable + body 1 m safety margin.
-
Correct use of the individual elements including "personal protective equipment"
must be ensured, because otherwise the safe functioning of the fall protection sys-
tem is NOT guaranteed.
-
Attachment to the fall protection system is completed through the rotating ancho-
rage eye with a karabiner and it must always be used with personal protective
equipment in accordance with EN 361 (safety harness) and EN 363 (fall protection
system).
-
ATTENTION!
For horizontal use, only lanyards may be used that are suited for this
purpose and have been tested for the respective edges (sharp edges, trapezoidal
sheets, steel girders, concrete, etc.).
-
Do NOT use fall protection systems if wind speeds exceed normal parameters.
-
The fall protection system must NOT be used by children and pregnant women.
-
If you provide the fall protection system to external contractors, their understanding
of this instruction manual must be confirmed in writing.
-
If the equipment is sold to other countries, the instruction manual must be provided
in the respective national language!
-
Comply with the customary national provisions for lightning protection.