InnoMedia MTA8000 Series Administrative Guide
Page 52
Copyright © 2022 InnoMedia. All rights reserved.
•
Provisioning tag: System.Prov.DefaultCfgUrl (Partial url for default config xml files)
•
Syntax:
Protocol://FQDNofProvisioningServer:Port/Path
Example:
System.Prov.DefaultCfgUrl=”
http://prov.example.com:8802/MTAFactoryDe
faultFilePath
”
3.
Optional: Trigger the restore-to-factory-default (RSTD) on the MTA right after the new factory default
files have been downloaded.
Provisioning tag: System.Prov.Restore2Default (1 : enable; 0: disable).
Example:
System.Prov.Restore2Default=”1”
Note: RSTD event will only be triggered when the following two conditions are met:
•
This System.Prov.Restore2Default tag value transitions 0 to 1 (further provisioning events will not
trigger an RSTD event even if this tag is left as “1”)
•
A set of factory default files has been downloaded
5.7
EMS Setting
5.7.1
EMS Server
The InnoMedia EMS server is a powerful provisioning and management platform for service providers to
perform device configuration/firmware management, to be able to see Call Statistics, Voice Quality
information, and to provide the ability to connect to devices behind NAT routers for diagnostics purposes.
Figure 46. Configuring EMS Server Information
Field Name
Description
Enable EMS
This enables the EMS feature.
Device Type (0-
254)
This is the device type configured on the
EMS Server, so that a user of the EMS server
will see the device by name in the device list.
The type is also important for what
