InnoMedia MTA8000 Series Administrative Guide
Page 26
Copyright © 2022 InnoMedia. All rights reserved.
the source IP is not in the
“
SIP Server list
”
,
the MTA rejects or drops this message.
The MTA initially creates a
“
SIP Server list
”
which contains the IP addresses resolved
from the settings of “Proxy Server”, “SIP
Domai
n” and the “EMS Server”.
See also
below for adding additional Trusted SIP
entities.
Action on Failed
Validation
Drop silently. The MTA simply drops the
incoming out-of-dialog SIP request
messages.
Reject with 400. The MTA replies with an
error SIP response code of 400 to the
sender.
Additional Trusted
SIP Entities
Input one or more addresses (IP or FQDN)
for additional servers from which the MTA
will accept incoming SIP messages. These
servers are in addition to those in the
“
SIP
Server List
”
which the MTA automatically
creates (see above).
4.1.3
Codec Setting
Configure voice codecs allowed by service providers for telephony services.
Figure 21. Codec Setting
Field Name
Description
Preferred Codec
List
List the Codecs to be enabled for this profile
and their order of importance.
Available Codecs:
•
PCMU/8000
–
Set Ptime
•
PCMA/8000
–
Set Ptime
•
G729/8000
–
Set Ptime and annexb on
or off