3
STOVE GUARD SGK500 USER MANUAL
1. Innohome Stove Guard and how to use it (cont.)
1.3 Stove Guard use and features
Stove Guard use
When the cooker has been turned off and the Stove Guard is signalling
, first turn all cook-
er knobs to ‘0’, then press the Intelligent Heat Sensor cover once. In cookers that are operated
by touch, just press the Intelligent Heat Sensor cover once.
An Intelligent Heat Sensor pre-alarm signal
, that has a short sound and a long break
(--___--___ ), sounds one minute before turning the cooker off. If the situation is not hazard-
ous, press the Intelligent Heat Sensor cover once during the pre-alarm signal. The Intelligent
Heat Sensor will learn that the situation was not hazardous.
A Control Unit pre-alarm signal
(sounds from behind the cooker), that has a short sound
and a long break (--___--___ ), indicates that the Intelligent Timer will turn the cooker off after
one minute’s time. By pressing the Intelligent Heat Sensor cover once, you will get more time
to use the cooker.
If the Safety Lock has ‘locked’ the cooker
, you can get it back in use by pressing the Intelli-
gent Heat Sensor cover once.
Stove Guard features
a) Overheating Monitor
The Intelligent Heat Sensor, installed above the cooker, reacts to a dangerously high temper-
ature or steep temperature rise. Several sensors with self-adjusting programming detect tem-
perature and its change. The Sensor ‘learns’ the users’ cooking styles, making hazard recogni-
tion precise, with no false alarms. The rate of temperature increase alarm is based on the steep
temperature rise that happens when the cooking vessel’s liquid has dried out. Reacting to the
temperature rise allows for an early detection and prevention of fire risk situations.
The Intelligent Heat Sensor will first sound a one minute-long pre-alarm signal (see Intelligent
Heat Sensor pre-alarm signal, on previous page), after which the cooker is turned off. Reset-
ting the pre-alarm signal causes the Intelligent Heat Sensor to become less sensitive.
The Intelligent Heat Sensor alarm is also reset automatically in about two minutes, after the
cooker has been turned off and the temperature starts to drop.
After automatic alarm reset, the cooker is turned back on normally: first turn all cooker knobs
to ‘0’, then press the Intelligent Heat Sensor cover once. In cookers that are operated by touch,
the electricity supply is returned automatically (burners are off after the electricity cut-off).
Summary of Contents for Stove Guard SGK500
Page 22: ...19 IMAGES 2 3 1...
Page 23: ...20 IMAGES 1 4 5 6 7 1 2 1 o n o f f 1 2 on off...
