Charging station main parts
1. Type 2 charging cable socket
2. LED indicators
Charlie internal structure
1. DIP Switch S1 (see: Installation - Dip switch configuration)
2. DIP Switch S2 (see: Installation - Dip switch configuration)
3. 1-phase contacts (L1, N, PE)
4. Strain relief for bottom-side cable inlet
5. 3-phase contacts (L2, L3) (Charlie-3)
6. Load Balancing connector (Charlie-3)
7. External input connector
8. Strain relief for back-side cable inlet
Delivery contents
Before installation, make sure you have all the needed parts
and accessories of the product. If you notice missing items,
contact the reseller or product importer immediately. In the case
of missing or broken parts, only replacement parts provided by
the product reseller, importer or vendor are allowed to be used.
1. Charlie electric vehicle charging station
2. Wall mounting screws (Steel zinc plated full thread pan head
TX25 ZP 4.5x30) and wall plugs (6x30 WIP)
3. Strain relief and installation screws (Pan head BN 20138).
4. Screws for closing the charging station cover from bottom
(Hexalobular socket flat BN2041)
5. Screw for closing the charging station cover from top
(Pan head TX20 MP 4x10)
6. Installation template
Warranty
Charlie electric vehicle charging station is meant to be used as
described in this installation and user guide.
The warranty and liability exclude damage resulting from:
•
Incorrect or inappropriate installation, setup or use of the
product
•
Neglect of instructions concerning transportation, installation,
use, or maintenance
•
Structural or electronic modifications, or changes made to
the charging station that are not in accordance with the
guidance provided in this document
Charlie VIN Plate
Innohome | Charlie electric vehicle charging station | Installation and User Guide
4
