Troubleshooting
Innohome | Charlie electric vehicle charging station | Installation and User Guide
LIGHTS
POSSIBLE CAUSES
DETAILS
Green
Blue
Red
ON
PULSING
BLINKING
Charging current limited, high tempera-
ture.
Charging is active. The vehicle is being
charged, but the charging has been lim-
ited 6A due to high internal temperature.
BLINKING
BLINKING
BLINKING
Device configuration error
Charging station not set up correctly.
Please contact to a qualified electrician
to check the device configuration. Turn
the circuit breaker off. Re-configure the
DIP switches.
BLINKING
OFF
BLINKING
Power relay is faulty
Charging station not operational. Turn
the circuit breaker off. Wait for 5s and
turn it back on. If the same problem
persists, please contact to a qualified
electrician to check the device configu
-
ration.
Cable lock motor malfunction
RS-485 communication error
Internal HW error
No RS-485 connection to host device
ON
OFF
BLINKING
The current value of the cable is invalid
Charging process has failed. Please
check the cable connector for damag-
es. If the cable connector is broken.
Please replace the charging cable and
try again. If the problem persists, please
contact qualified electrician.
6mA residual current has been detected
Protective ground lost, 6V to 12V change
detected
Cable locking mechanism status invalid
12
