6000-B1
User’s Guide
37
Enter the
Destination IP Address
,
Destination Subnet Mask
, and
UDP/TCP
Destination Port
(single port or port range (Port:Port)).
Enter
Source MAC Address
and
Source MAC Mask
Enter
Destination MAC Address
and
Destination MAC Mask
Select the
802.1q Priority
from the list.
Click
Apply
to add this QoS class
Routing
The section shows the IP addresses or address routes for the computers connected
to the gateway to reach different destinations, such as the local network, the gateway,
or the Internet. The Routing feature provides three more setting pages including
Default Gateway, Static Route and RIP.
Default Gateway
Figure 48: Default Gateway Configuration
Global Setting
Check
Enable Automatic Assigned Default Gateway
checkbox, this gateway will
accept the first received default gateway assignment from one of the PPPoA,
PPPoE or Static IP/DHCP interface. If the checkbox is not checked, enter the
static default gateway AND/OR a WAN interface.
Click
Save
to save the configuration
NOTE: If changing the Automatic Assigned Default Gateway
from “unselected” to
“selected”, you must reboot the gateway to get the automatic assigned default
gateway