manualshive.com logo in svg

Innoband 6000-B1, User Manual, Page: 2 / 87

Share
Download
Innoband 6000-B1 User Manual Download Page 2

6000-B1 

User’s Guide 

 

II

 

User Manual 

 
 
 

Innoband VDSL2/ADSL2+ Wireless Gateway 6000-B1

 

 
 
Information in this document is subject to change without notice and does not represent a commitment on 
the part of Innoband Technologies, Inc. The software described in this document is furnished under a 
license agreement and may be used or copied only in accordance with the terms of the license agreement. 
It is against the law to copy the software on any other medium except as specifically allowed in the license 
agreement. The licensee may make one copy of the software for backup purposes. No part of this manual 
may be reproduced or transmitted in any form or by any means, electronic or mechanical, including 
photocopying and recording, for any purpose without the written permission of Innoband Technologies, 
Inc. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
All contents are Copyright © 2010 Innoband Technologies, Inc. All rights reserved. 
 
 
Manual Version 1.0 
September 2010 
 
 
Innoband

™ is a trademark of Innoband Technologies, Inc. The trademarks, logos and service marks 

(“Marks”) displayed on this manual are the property of Innoband or other third parties. Users are not 
permitted to use these Marks without the prior written consent of Innoband or such third party that may 
own the Mark. IBM is a registered trademark of International Business Machines Corporation. Intel and 
Pentium are registered trademarks of Intel Corporation. Microsoft, MS-DOS, Windows, and the Windows 
logo are registered trademarks of Microsoft Corporation. All other products are trademarks or registered 
trademarks of their respective owners. 

Summary of Contents for 6000-B1
























































































Reviews:

No comments