6000-B1
User’s Guide
22
IP over ATM (IPoA)
Figure 23: WAN Connection, MER Configuration
To configure the IP over Ethernet settings:
Enter the
WAN IP address
and
WAN Subnet Mask
.
Select
“
Use the following default gateway
” and then also enter the
gateway IP
address
and
Use WAN Interface
where packets will be sent to
.
Select
“
Use the following DNS server addresses
” and then also enter the IP
addresses of
Primary DNS server
and
Secondary DNS server.
Click
Next
The
NAT configuration
and
WAN Setup Summary
page will show up. Please refer
related pages above for reference. Click
Save
if correct or click
Back
to restart the
configuration again.