INNO INNOPAD, Instruction Manual, Page: 27 / 28

EN
INSTRUCTION MANUAL INNO
PAD
| 27
INNO
4. If you are using an iPad 2™*, insert the 2 spacer plates
in the bottom of the metal base plate for a perfect fit
underneath the decorative glass frame (Fig. 18).
5. Fix the metal base plate − including spacer plates when
installing iPad 2™* − to the installation box with the
remaining stop screws.
6.2.3 FIXING THE IPAD™*/**
TO THE METAL BASE PLATE
Please wear the protective gloves when installing
the INNO
PAD .
1. Take the magnetic adhesive foil and the connection board
from the packaging.
2. Unpeel the protective foil from the adhesive area of the
magnetic adhesive foil and stick it to the rear of the iPad™*
(Fig. 19).
Attention: When using the iPad 2™*, please
position the magnetic adhesive foil so that it sticks to the
spacer plates on the metal base plate.
3. Plug the connection board into the iPad™* docking
connector with the circuit board facing to the rear (Fig. 19).
4. Carefully push the iPad™* into the installation box guide
with the connection board circuit facing forward until it is
flush and the magnetic adhesive foil on the rear of the
iPad™* sticks to the metal base plate (Fig. 20).
5. Clean the iPad™* display with the INNO cleaning cloth.
6.2.4 INSTALLING THE DECORATIVE GLASS FRAME
Take care when handling the valuable decorative glass frame.
Do not drop the glass frame during installation to prevent
physical damage and injuries.
1. Carefully take the decorative glass frame out of the
packaging. Please wear the gloves to protect the
high-quality surface during installation.
2. Position the decorative glass frame exactly on top of the
metal base plate so that the INNO logo appears in the lower
part of the frame (Fig. 21).
3. Carefully place the decorative glass frame onto the metal
base plate along the adjuster until the magnets on the rear
of the frame stick solidly to the plate (Fig. 22).
6.2.5 TURNING ON THE DEVICE
1. Turn on the power supply.
2. The home button illuminates and the iPad™* is charged up
and ready to use.
3. Turn on the iPad™* and apply the required settings.
Please refer to the manufacturers‘ operating manuals for
details on operating the iPad™* and installed apps.
*Trademark notice: iPad™ is a trademark of Apple Inc., registered in the U.S. and other countries.
** Not included in the scope of delivery.
Figure 19
Figure 18
Figure 20
Figure 21
Figure 22