EN
INSTRUCTION MANUAL INNO
PAD
| 23
INNO
6 INSTALLING THE INNO
PAD
6.1.1 INSTALLING THE FLUSH-MOUNTING BOX
We recommend using the INNO flush-mounting box for
perfectly fitting the INNO
PAD
into a solid wall. It is specially
designed to accommodate the INNO
PAD
installation box and gu-
arantees that the complete INNO IN-WALL-SYSTEM
SOLUTION is perfectly aligned and seated securely.
This item is not included in the scope of delivery but can be
ordered separately (product number: INN PAD-UP-99-99-02-00).
1. Take the template for solid wall installations from the
packaging and set it up horizontally at the installation site.
2. Fix the template to the wall with adhesive tape and trace the
inner lines with a pen (Fig. 1).
3. Remove the template from the wall and
ensure that the
wall is free of supply pipes, cables and metal struts at the
installation site.
4. Carefully remove the area of wall within the markings so as
to insert the flush-mounting box.
5. Remove the flush-mounting box from the packaging.
6. Hold the flush-mounting box to the wall, taking care that
the „TOP“ marking at the bottom of the box is facing up, and
find the optimal position for feeding the power cable into
the box (Fig. 2).
7.
Ensure that all live cables are disconnected from the
power supply at the installation site!
Break out the
corresponding cable feedthrough and feed the power cable
and, if necessary, audio wire through the opening into the
flush-mounting box. Take care not to damage the cables.
8. Insert the flush-mounting box perpendicularly into the wall
recess, ensuring that the „TOP“ marking is facing up, and fix
the box to the wall (Fig. 3).
Tip:
Use the fixing holes in the bottom of the flush-mounting
box for this purpose.
9. To fix the flush-mounting box in place, plaster must be
applied around it so that it fits smoothly into the wall.
Apply the plaster to all sides of the box so that there are no
protruding parts and wipe away all excess plaster to provide
a flush finish.
6.1 SOLID WALL INSTALLATION
Figure 1
Figure 2
Figure 3