30
Fig 3.5.4
The following table describes the fields of this screen.
Label
Description
Select Access Control
Mode
Choises are
Disable
,
Allow Listed
and
Deny Listed
. Select
Allow Listed
to block access to the router, MAC addresses not listed will be allowed to
access your router. Select
Deny Listed
to permit access to the router,
MAC addresses not listed will be denied to access your router.
Apply Changes
Click this button to save the change of
Select Access Control Mode
.
MAC Addr
Enter the MAC address(in XX-XX-XX-XX-XX-XX format) of the
wireless station that are allowed or denied access to your router in this
address field.
Apply Changes
Click this button, the
MAC Addr
will be added to
Current Access
Control List
.
Reset
Click this button to begin configuring the
MAC Addr
afresh.
Current Access Control
List
The MAC address in this table will be allowed or denied access to the
router.
Delete
Click this button to delete the row you select in the
Current Access
Control List
.
Delete All
Click this button to delete all rows in the
Current Access Control List
.
Reset
Click this button to begin configuring the
Current Access Control List
afresh.
3.5.5 WDS Settings
Click
WDS Settings
in the sub-menu to open the screen of Fig 3.5.5. Wireless Distribution System is commonly used
in areas requiring multiple APs, where wiring is not possible or costly and for providing back-up paths between APs.
Notice: You must select the “AP+WDS” option in chapter 3.6.1 before you configure this page.
Summary of Contents for W3100
Page 1: ...W3100 Single port ADSL 2 Wireless Router User Manual ...
Page 54: ......
