13
3.3.1 Wizard
Wizard
enables speedy and accurate configuration of your Internet connection and other important parameters.
The following sections describe these various configuration parameters. Whether you configure these parameters
or use the default ones, click 'Next' to enable your Internet connection.
When subscribing to a broadband service, you should be aware of the method by which you are connected to the
Internet. Your physical WAN device can be either Ethernet, DSL, or both. Technical information regarding the
properties of your Internet connection should be provided by your Internet Service Provider (ISP). For example,
your ISP should inform you whether you are connected to the Internet using a static or dynamic IP address, or
what protocols, such as PPPOA or PPPoE, you will be using to communicate over the Internet.
Click
Wizard
in the sub-menu to open the screen of Fig 3.3.1-1. In this page, you can config the VPI/VCI
number.
Fig 3.3.1-1
Be sure to use the correct Virtual Path Identifier (VPI) and Virtual Channel Identifier (VCI) numbers assigned to
you. The valid range for VPI is 0 to 255 and for VCI is 32 to 65535(0 to 31 is reserved for local management of
ATM traffic).
Then press
Next
, the Fig 3.3.1-2 screen will appear. In this page, you can select the WAN Connect Type and the
encapsulation method.
Summary of Contents for W3100
Page 1: ...W3100 Single port ADSL 2 Wireless Router User Manual ...
Page 54: ......
