28
Fig 3.5.2-2
The following table describes the fields of this screen.
Label
Description
SSID Type
Select the SSID here.
Key Length
Select 64-bit or 128-bit to use data encryption.
Key Format
If you chose
64-bit
, you can choose ASCII(5 characters) or Hex(10
characters).
If you chose
128-bit
, you can choose ASCII(13 characters) or Hex(26
characters).
Default Tx Key
Select the default Encryption Key here.
Encryption Key 1 to 4
The Encryption keys are used to encrypt data. Both ROUTER and wireless
stations must use the same
Encryption Key
for data transmission.
If you chose
64-bit
and
ASCII(5 characters)
, then enter any 5 ASCII
characters.
If you chose
64-bit
and
Hex(10 characters)
, then enter any 10
hexadecimal characters.
If you chose
128-bit
and
ASCII(13 characters)
, then enter any 13 ASCII
characters.
If you chose
128-bit
and
Hex(26 characters)
, then enter any 26
hexadecimal characters.
Apply Changes
Click this button to save the changes of this page.
Close
Click this button to close this window.
Undo
Click this button to begin configuring this screen afresh.
3.5.3 Advance Settings
Click
Advance Settings
in the sub-menu to open the screen of Fig 3.5.3. These settings are only for more
technically advanced users who have a sufficient knowledge about wireless LAN. These settings should not be
changed unless you know what effect the changes will have on your Access Point.
Summary of Contents for W3100
Page 1: ...W3100 Single port ADSL 2 Wireless Router User Manual ...
Page 54: ......
