Inkbird ITC-608T, Manual, Page: 24 / 54

22
completed, the detailed status is described in 6.4.6.8.
4.6.2 TR
is the parameter for whether the timer function is
enabled. 0 is off and 1 or 2 is on.
4.6.2.1 TR=0,Temperature Control Mode
The timer function
will not start, all the setting parameters after the parameter TR
will not shows in the menu, and there is no need to set.
4.6.2.2 TR=1 Continuous Timer Mode & TR=2 Target Timer
Mode
The user is required to set the time and corresponding
temperature control parameters, at this time, TS(temperature
setting value) will be invalid, the system will control according
to the temperature of the time period.
Regarding the difference between TR=1(Continuous Timer
Mode) and TR=2(Target Timer Mode), the following table
illustrates their differences in details.
Stage
X(N=1~12)
STX(X=1~12)(
℃
)
HTX(X=1~12)(Minutes) UAX(X=1~12)
Stage1 20.0 10 n
Stage2 30.0 7 n
Stage3 35.0 12 n
Different reaction times are obtained, as shown in the following table
：
TR = 1 Continuous Timer mode TR = 2 Target Timer mode
Time
[minutes]
Temp[°C] Stage Temp[°C] Stage
0 10 1 10
1 12 1 12
2 14 1 14
3 16 1 16
4 18 1 18
5 20 1 20 1
6 20 1 20 1
7 20 1 20 1
8 20 1 20 1
9 20 1 20 1
10 20 1 20 1
11 22 2 20 1
12 24 2 20 1
13 26 2 20 1
14 28 2 20 1
15 30 2 22
16 30 2 24
17 30 2 26
18 32 3 28
19 34 3 30 2
20 35 3 30 2
21 35 3 30 2
22 35 3 30 2
23 35 3 30 2
24 35 3 30 2
25 35 3 30 2
26 35 3 32