ITC-106 User Manual
Inkbird Tech. Co., Ltd. www.ink-bird.com
5
3. Dimension and Installing
Size Diagram (Unit: mm)
Shell Size Install Adapter Panel Cutout
Insert the temperature controller into the hole in the panel, put the adapter from the
back and push it to button and make it clasp for temporarily fastening. Be sure there
is no gap among the controller, panel and the adapter and then fasten the two screws
on the adapter with the torque of 0.29N to 0.39N.
Be sure the ambient temperature is within the stated working range in the manual,
especially when there are two or more temperature controllers installed.
4. Wiring Diagram
2 wires sensor 3 wires sensor Thermocouple Output Relay Output Voltage
Power Connection: #9 and #10 terminals are for power connecting, which its supply
voltage should be match the item model.
Platinum Resistance Sensor Connection:
Three wires sensor:
connected the #3 terminal with the red wire, the other two bule
wires should be separately connected to the #4 and #5 terminals.
And the sensor with two wires (e.g. PT100)
should be separately connected to
the #3 and #5 terminals, the #4 and #5 terminals must be connected with the wire.
Thermocouple Connection(e.g. K sensor):
#3 terminal is connected to the
positive pole(Red) and the #4 terminal is connected to the negative pole(Blue).