1. Read all instructions.
2. Check that flexible leads and the appliance
are in good condition.
3. Check your plug sockets are not overloaded
with too many electrical appliances as this can
lead to overheating.
4. Do not use appliance for other than intended
use.
5. Do not touch hot surfaces. Use handles or
knobs.
6. Do not cut the cord, or put it on hot surfaces.
7. Do not place on or near a hot gas or electric
burner, or in a heated oven.
8. Place the Sous Vide or related containers
on a heat-safe surface or trivet, away from
counter edges.
9. The water level should not exceed the
“MAX” scale line of the stainless steel part.
10. Extreme caution must be used when
moving an appliance containing hot oil or
other hot liquids.
11. Never use deionized water with Inkbird
Sous Vide as it may damage the Sous Vide.
12. Don’t try to clean or repair the appliance
when it is still plugged in.
13. Don’t wrap flexible cables around the
appliance when it is still warm.
14. Always attach plug to appliance first,
then plug cord into the wall outlet. To
disconnect, turn any control to “off”, then
remove plug from wall outlet.
15. Switch off the device when not in use.
16. Please disconnect the power as soon as
possible if the Sous Vide falls into the water,
do not put your hands into water when
plugged in. The Warranty does not include
water damage.
17. This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
Children should be supervised to ensure that
they do not play with the appliance. Close
supervision is necessary when any appliance
is used by or near children.
4.1 Get Inkbird Pro app for your phone
Get the InkBird Pro app from Google Play or
App Store to download the preferred app for
free, or you can scan the QR code to
download the preferred app directly.
4.2.1 Connect to your phone
1. Register before using the Inkbird Pro app.
Select your Country/Region, enter your
e-mail, then a verification code will be sent
to your mailbox, enter it to confirm your
identity and the registration is done.
2. Open the app and click “+” to start the
connection.
3. Plug in the Inkbird Sous Vide, check if the
Wi-Fi icon is blinking rapidly and confirm on
your app if it is, then enter your Wi-Fi
password to connect to wireless network,
click OK to connect the device.
4. Connection succeed.
Note: If you have registered an account
before, just log in directly.
4.2.2 Connect the device in AP mode
If the device is not connected to your phone,
the Wi-Fi icon flashes rapidly by default.
Press and hold the “ ” button for seconds
to switch to AP mode, the Wi-Fi icon flashes
slowly in AP mode.
1. Open the app and click “+” to start the
connection.
2. Plug in the Inkbird Sous Vide, choose the
Sous Vide, click “AP Mode” of the right top
corner, check if the Wi-Fi icon is blinking
slowly and confirm on your app if it is, then
enter your Wi-Fi password to connect to
wireless network, click OK to connect the
device.
3. The app will redirect to your phone’s
WLAN Setting interface, select the
“SmartLife-XXXX” to directly connect to the
router without typing in password. Go back
to the app and enter the automatic
connection interface to click “Done”.
4. Connection succeed.
4.3 Wi-Fi Reset
Press and hold the “ ” button for 5
seconds to reset the Wi-Fi, then repeat the
steps to connect with your phone.
The device only supports 2.4GHz Wi-Fi router.
4.4 Operation Interface on Inkbird Pro
12
