Firmly pull down and out to remove air resonator box.
This may require some aggressive pulling when remov-
ing the resonator box.
Proceed to remove the second 10mm bolt as shown
above. Do not remove the air box just yet.
Drivers side fog light harness is now removed. Pull and
remove the entire front bumper and place it to the side.
Remove the second 10mm bolt. Now the air res-
onator box is ready for removal.
Picture shows removing phillips screw from bumper
Unclip the fog light harness from the bulbs on the
passenger and driver side bumper. (Passengers
side is shown above)
Stock air box cleaner shown in this picture
Remove screw on each side of the front bumper using
a phillips screw driver
Remove front bumper. Gently pop plastic clips up
using a flat head screw driver as shown above (B).
There are 7 plastic clips on top and 10 plastic clips
on the bottom of the bumper (A).
Firmly pull the sides of the front bumper outward until
the bumper unlatches from the clips located below the
headlights.
With the front bumper removed, you can now access
the air resonator box located on the driver side. Use a
10mm 3/8 socket and ratchet to remove the first
10mm bolt.
The upper air box is secured with two 10mm bolts.
Remove the first one as shown above.
Figure 3
Figure 4
Figure 5
Figure 6
Figure 7
Figure 8
Figure 9
Figure 10
Figure 11
Figure 12
Figure 13
Figure 14
(A)
(B)
