Part number SP1675
08-09 Honda Accord
2.4L, 190hp, 4cyl.
1- 2 pc. cold air intake system
Feat. MR Tech & Air Fusion
This system converts into a short ram
1- 3” Ea Nanofiber filter (#1014-BB)
1- 2 3/4” x 3” step hose (#3011)
1- 3” straight hose (#3044)
1- 7” 15mm vac hose (#3079)
1- 8 1/2” 8mm vac hose (#3091)
1- Power Band .312/.040 (#4003)
3- Power Bands .362/.048 (#4004)
3- m6 flange nuts (#6002)
2- Fender washers (#6010)
2- m6 vibra-mount (#6020)
1- Instructions (7 Pages)
Note:
The installation of this cold air intake does require mechanical skills. Removal of the front bumper requires
loosening and removing several plastic plugs and screws that may be difficult. In addition to removing the
bumper, you will also have to remove the air resonator box, battery and tray when beginning this installation.
Injen strongly recommends that this system be installed by a professional mechanic.
MR
Technology, “The World’s First Tuned air Intake System!”
Factory safe air/fuel ratio’s for Optimum performance
Patent# 7,359,795
Now equipped with “Air Fusion” Patent pending
Figure 1
Figure 2
Warning: Manufactures attempting to duplicate Injen’s
patented process will now face legal action.
MR Technology Step down process:
1- Calibration Method for Air Intake Tracts for Internal Combustion Engines.
Covered under Patent# 7,359,795
2- Calibration Device for Air Intake Tracts for Internal Combustion Engines.
Published and patent pending
3- Calibration Method and Device for Air Intake Tracts having Air Fusion Inserts
Published and patent pending
Note: The C.A.R.B Exempt sticker must be attached under the hood in a manner such that it is easily viewed by an
emissions inspector.
