4.5.8.
Mounting for an installation with 1 collector
n
Installing the solar collector
1. Screw the lower fastening lugs onto the bottom batten.
2. Fit the collector. The fastening lugs must be fitted into the holding
groove.
3. Postion the upper fastening lugs in the holding groove on the
collectors and screw them onto the batten.
Respect the dimension of 245 mm from the tiled area when
fitting the fastening lugs and 80 mm from the edge of the
tiles to the collector to avoid having to cut tiles along one
edge.
The solar collector must be mounted shortly before commissioning
the solar system. This minimises the time during which the collector
is heated pointlessly, without heat transporting fluid.
66
0
M002313-H
165
80
1
3
3
1 2
1 2
2
3
4. Installation
NEO 2.1 / SUN 211
55
20/02/2013 - 300024195-001-02
