n
Waterproofing the connection between the 2
collectors (upper)
1. Clean the support surface. Glue the BUTYL strip to the
intermediary clips, leaving 3 mm clearance.
2. Leave the BUTYL strip loose at the end of the intermediate clips.
3. Squeeze silicone on to the joints between the mounting
components.
4. Remove the protective film from the self-adhesive foam.
5. Glue the self-adhesive foam to the covering plate.
6. Cover the upper part of the covering plate with silicone.
7. Fit the covering plate, secure it and spread a veil of silicone over
it.
C003460-E
1
3
6
7
5
4
3
40
2
NEO 2.1 / SUN 211
4. Installation
20/02/2013 - 300024195-001-02
26
