8
The SmartLoop control panel
Programming manual
Chapter 3
The SmartLoop control panel
3.1
The Overlay
All the models in the SmartLoop series, except for SmartLoop2080/S and SmartLoop1010/S (flush front
with no display or keypad), have the following overlay:
[A]
40 character x 4 line alphanumeric display. Indicates the system status, signals critical events (with priority
given to the most serious events) and allows you to navigate through of the main menu and screens.
[B]
Keys
S
,
T
,
W
,
and
X
allow you to move and work on the menu screens.
[C]
The
Esc
key allows you to quit an operation and exit the screen without saving, or go to the options of a higher-
level menu.
The
key allows you to confirm an operation and exit a screen, or go to the options of a lower-level menu.
[D]
Alphanumeric keypad for data entries.
Key
1
allows you to view the specifics of events which provide detailed informatio
n
.
If an event relating to a loop device is shown on the display, key
2
will allow you to access the bypass/
unbypass loop device menu (refer to paragrafo
11.2.1
) .
[E]
Pre-configured status LEDs.
[F]
Programmable status LEDs (yellow).
Customizable.
This LED will blink during the programming phase.
[G]
Fast buttons for use in the event of alarm or fault.
[H]
Keyswitch: allows level 2 users (Users, Authorized Users) to access the system. Can be used instead of code
entry.
A
B
C
D
E
F
G
H
