Programming manual
Introduction
5
Chapter 1
Introduction
This Programming manual describes the essential configuration phases of a fire alarm system and the
programming process of the control panel. For a complete description of the programming process via the
SmartLeague software programme, refer to the SmartLeague instructions manual.
Regardless of the exact type of control panel, all the instructions herein are pertinent to the SmartLoop
system.
Refer to the User's Manual for the complete description of all the control-panel signaling methods (LED,
display) and the respective response actions.
Note:
The control panels described in this manual have been designed and developed to the highest
standards of quality, reliability and performance adopted by INIM Electronics. All product components
are capable to application requirements and able to operate in compliance with the related technical
specifications when the temperature external to their casings complies with Category 3k5 of IEC
EN60721-3-3:1995.
1.1
In order to validate the IMQ-SECURITY SYSTEMS certification, and in
compliance with EN54-2 regulations:
1. All the manual alarm buttons and fire detectors employed in the system must be associated with fire
detection and alarm functions.
2. The functions associated with the programmable LEDs on the control panel frontplate (Keypad/Display
board and LED board), and on SmartLetUSee/LCD and SmartLetUSee/LED repeaters must be set up in
accordance with the colour of the LEDs:
•Red: alarm
•Yellow: fault, test and tamper
Note:
The GAS control function is not EN54-2 compliant, due to the fact that this feature is not mentioned in
the aforesaid standard.
