Technical specification
230/125 volts. Low-pressure halogen, 12 volts, 50 watts, GY 6,35
socket. Electronic transformer with sliding dimmer.
The symbol on the glass reflector means that only low-
pressure light bulbs may be used.
Important:
The glass cylinder must be replaced in the event of
damage!
Any repairs that may become necessary must be carried out by
a qualified electrician.
▲
Please do not fold the ends of the shade inwards. Both ends
should be freely visible, as shown in figure .
Connecting the transformer
Unwind the lamp cable and plug the two connectors into the
sockets on the transformer. Ensure that the connectors are
securely in position.
Changing the light bulb
Caution:
Unplug the lamp from the power supply and allow it
to cool down completely. Do not touch the new bulb with your
bare hands!
Unhook the paper shade at both ends and remove it. Hold the
socket with one hand and use your free hand to reach down
through the protective cage and remove the glass cylinder before
replacing the spent bulb. Fit the cylinder back on the retaining
clips at the sides of the socket. Check that the cylinder and bulb
are securely in place.
Cleaning
Important:
Never use damp cloths, sponges or similar on the
paper shade! Clean the shade if necessary with a light feather
duster or paintbrush. The metal par ts can be wiped with a
dry cloth.
▲
▲
5
E
n
gl
is
h
11
E
n
gl
is
h
10
▲
2
Summary of Contents for The MaMo Nouchies Wo-Tum-Bu 3
Page 12: ...2 21 20 1...
Page 13: ...23 22 4 5 3...
