Cleaning
Important:
Never use damp cloths, sponges or similar on the
paper shade! Clean the shade if necessary with a light feather
duster or paintbrush. The metal par ts can be wiped with a dry
cloth.
Technical specification
230/125 volts. Low-pressure halogen, 12 volts, 50 watts, GY 6,35
socket. Electronic transformer with sliding dimmer.
The symbol on the cylindrical shield means that only
low-pressure light bulbs may be used.
Any repairs that may become necessary must be carried out by
a qualified electrician.
▲
▲
Instructions for assembly
Caution:
Do not connect the lamp to the power supply until
the assembly is completed.
Unwind the lamp cable and plug the two connectors into the
sockets on the transformer. Ensure that the connectors are
securely in position.
Important:
Check that the cylindrical shield (
1
) is correctly
positioned, with the socket squarely in the centre. Never allow
the paper shade to touch the socket or bulb!
Changing the light bulb
Caution:
Unplug the lamp from the power supply and allow it
to cool down completely. Do not touch the new bulb with your
bare hands!
Unhook the silicon ring at the top and bottom of the shade and
lift the shade carefully away from the lamp.
Hold the socket with one hand and use your free hand to
replace the spent bulb.
Fit the paper shade back over the lamp and thread the silicon
rings onto the hooks at the top and bottom of the mounting rod.
Important:
Check that the cylindrical shield (
1
) is correctly
positioned, with the socket squarely in the centre. Never allow
the paper shade to touch the socket or bulb!
▲
3
4
English
9
English
8
3
