9
8
Changing the LED bulbs
Caution:
Unplug the lamp and allow the LED bulbs to
cool down completely.
Remove the connecting wire (
3
) from the contact
sleeve (
4
) on the spent bulb, unscrew the bulb from the
holder ring (
2
) and insert the replacement as described
under „Inserting the light bulbs“ above.
①
The LED bulb is manufactured exclusively for Ingo Maurer
GmbH. Replacements are available from our webshop or
authorized retailers.
Cleaning
The goose-feather wings can be cleaned carefully with a
soft paintbrush. The wings can be impregnated with ordi-
nary hairspray or hair lacquer.
A microfibre cloth should be used for the base and the
tinned wires.
Technical specification
220-240 Volt~, 50 Hz PF 0,99; 110-130 Volt~, 60 Hz., PF 0,98
The correct voltage and frequency for your lamp are indicated
on the type label.
Secondary 12 Volt AC, 7 x 1,5 watt LED, E27 sockets.
According to the manufacturer, the LED has an average life
of 15 000 hours.
Electronic transformer max. 20 W LED, dimmable (dim-
mer not included).
It is possible to connect a universal dimmer for LEDs (with
low or adjustable minimum load).
The lamp is supplied with bulbs of energy class A+.
English
English
Caution:
The LED light bulbs must not be used in any
24 volts halogen version of Birdie or Lucellino!
A defective lamp or LED bulb must be disposed
as electronic scrap, it must not get into
domestic waste.
Any repairs that may become necessary must be carried
out by a professional electrician. In the event of damage
to the external power cord, replacements may only be
fitted by Ingo Maurer GmbH.
The legal and contractual warranty for defects and product
liability will be void, should the installation instructions not
be duly followed or non-original components be employed.
