Ingo Maurer 18x18, Instructions Manual

Page: 6 / 13

11 10
English

Adjustment
Important: Switch the lamp off (fuse/switch in the OFF
position) before making adjustments as shown in fig.
⑤
.
NB: The maximum adjustment range is 180° to the left or
right around the longitudinal axis of the lamp.

Adjusting the ball joints
The screws on the left and right of each ball joint (on the
shade and on the back of the canopy base plate) can be tigh-
tened with the Allen key supplied. Turn the screws clockwise
to increase the tension.
⑥

Cleaning
The lamp can be cleaned with a dry, lint-free cloth or a
feather duster.
Important: Any contact with cleaning fluids or sprays can
damage the LED module.

Technical specification
230 V~50 Hz; 110-130 V~60 Hz.
The correct voltage and frequency for your lamp are indica-
ted on the type label.
Main-voltage LED 22W, Powerfaktor 0,98, 0,87cos.,
1600 lm, 3000 K, CRI > 90.
Continuously dimmable (see

Compatible wall dimmers,
below).
The lamp is supplied with a light source of energy class
A
+ .
The light source can be replaced by Ingo Maurer GmbH,
a by Ingo Maurer authorized service technician or a
similar qualified person.
Caution; danger of electric shock
A defective lamp must be disposed as electronic
scrap, it must not get into domestic waste.
Any repairs that may become necessary must be carried
out by a professional electrician. In the event of damage
to the external power cord, replacements may only be
fitted by Ingo Maurer GmbH. The legal and contractual
warranty for defects and product liability will be void,
Should the installation instructions not be duly followed
or non-original components be employed.

Compatible wall dimmers
The lamp can be connected to a special Triac (leading edge
or trailing edge phase control) dimmer for continuous and
flicker-free operation. For current recommendations on com-
patible dimmers please see our website:
https://www.ingo-maurer.com/en/products/18x18
English