ABX2011IQM01_ - Installation and Operation Manual
4. Once the lower plates have been removed, close the front and rear doors to make handling the station
safer. The side door will remain open to facilitate the positioning of the station on its anchoring points to
the ground.
5. With the help of a crane (see section
) position the station at its anchoring points to the
ground.
CAUTION
The handling by crane of the station with the side door open must be the minimum possible, only to position it
in its fixing points. Whenever possible, handling will be done with all doors closed.
6. In case of executing the installation with threaded rods, secure the fixings with washers and nuts. If the
installation is carried out with screws, install these screws together with the corresponding washers.
Installation of screws and washers in the fixing points to the floor
7. Verify that the unit has been properly installed.
33
Installing the unit
Ingeteam
