ABX2011IQM01_ - Installation and Operation Manual
Follow these steps:
1. Mark the fixing points on the floor.
2. In case of fixing with screws, drill the ground with a suitable drill bit. If threaded rods are to be used,
install these in the ground.
332
20 ~ 30
414,5
Installation of threaded rods in the ground
3. Before positioning the charging station in its final location, remove the two lower plates shown in the
following figure. To gain access it is necessary to open the front, side and rear doors.
Simplified view of the bottom of the station
32
Installing the unit
Ingeteam
