AAY2000IKI06
27
Installation manual
Ingeteam Power Technology, S.A.
2+ 2-
1+ 1-
Check that the connector terminals have been correctly tightened. Re-insert the connector in the correct position.
Tighten the cable gland to ensure that the equipment is airtight.
The analog input cable diameter must not be greater than 9 mm.
5.3.6. DC output
The Ingecon
®
μWind Interface and the Ingecon
®
µWind power stages are connected through the DC voltage cable
supplied with the Ingecon
®
µWind.
1.
Connect the push-pull terminals of this cable to the inverter.
Ingecon
®
μ
Wind TL
Ingecon
®
μ
Wind with transformer
DC quick connectors
