Ingersoll X12I, Quick Setup Manual, Page: 15 / 34

15
Main Menu
USER MENU
A number of User menu information displays are available
that can be accessed directly from the front panel using
the Up and Down navigation buttons.
Real Time Clock:
17:30 #1
17:30 (24hr system)
#1 = Monday to #7 = Sunday
Compressor Detailed Status:
A: 100%
1
Compressor 1
‘A’ (Duty) sequence assignment
‘100%’ percentage load
Status Symbol:
Standby
Running, Offload
Running, Loaded
#
Removed From Service in Table Priority
Selection (# = Table Number)
Removed From Service in Long Term
Maintenance Menu
Removed From Service by Short Term IR-PCB
Maintenance Switch Function
Alarm (Warning)
Not Available, Shutdown (Trip), Stopped
Network Communications Error
(RS485 connectivity only)
The detailed status of each compressor in the system is
shown separately.
Primary Detected Pressure:
102 psi
The pressure detected on the unit’s primary pressure
sensor.
When using remote pressure balancing functions
the main display ‘control’ pressure may differ from the
primary detected pressure.
Pressure Balance Function
2
nd
Pressure Input:
101 psi
The second local pressure value.
Only displayed if the 2
nd
Pressure sensor
function is enabled.
2
nd
Pressure Sensor Input
Differential Pressure:
69 mBar
The differential pressure between the Primary and 2
nd
Pressure sensor inputs.
Only displayed if the 2
nd
Pressure sensor
function is enabled and selected for air
treatment pressure differential monitoring.
2
nd
Pressure Sensor Input