Ingersoll-Rand TZ1050, User Manual

Page: 8 / 44

USER MANUAL
MODEL NO.: TZ730–1710
Rev. 08 – 14 September 2005
2
1.2.1 P
RESSURE
V
ESSEL
R
EGULATIONS
The pressure vessels are designed and built to meet the American Society of
Mechanical Engineers (ASME) standards. They fulfill the test of the certifying procedure
and carry the ASME symbols
U or UM .
RANGE OF APPLICATION
Design Pressure Max: 150 psig
Design Temperature Max: 500 °F (260 °C)
Min: -20 °F (-29 °C)
1.2.2 A
IRTIGHTNESS
T
EST
Each
I I n n g g e e r r s s o o l l l l - - R R a a n n d d
® ®
adsorption dryer is subjected to, and must pass, an airtightness test
prior to shipment.
1.3 SAFETY INSTRUCTIONS
This technical manual contains basic tips which must be followed during set-up,
operation and servicing. It is of utmost importance that it be read by the assembly
technician before installation and start-up as well as by the specialist/operator in charge.
It must always be within reach at the place where the adsorption dryer is being used.
1.3.1 I
DENTIFICATION OF
S
IGNS AND
S
YMBOLS IN THIS
M
ANUAL
The safety tips contained in this manual, whose disregard could endanger people and
equipment, are indicated by a general danger sign and the additional markings
Danger!
or Attention! or Warning!
Danger! / Attention!
Safety sign in accordance with DIN 4844 - W9
Warning – high voltage!
Safety sign in accordance with DIN 4844 - W8
Safety tips printed directly on the adsorption dryer must be heeded at all times and must
be kept completely legible.