USER MANUAL
MODEL NO.: TZ730–1710
Rev. 08 – 14 September 2005
APPENDIX A
MSDS
A2
2. HAZARDS IDENTIFICATION
_____________________________________________________________________________
EMERGENCY
OVERVIEW:
Activated
alumina
adsorbs
certain
gases
and
liquids.
While
the
alumina
itself
is
principally
inert,
the
bead/powder
may
exhibit
properties
of
absorbed
material.
Dust
is
irritating
to
respiratory
tract.
Low hazard for usual industrial or commercial handling.
May cause staining,
metal
fume
fever,
pulmonary
fibrosis
and
pneumoconiosis.
Can
decompose
at
high
temperatures
forming
toxic
gases.
Contents
may
develop
pressure
on
prolonged exposure to heat.
_____________________________________________________________________________
POTENTIAL HEALTH EFFECTS
The following health effects data pertains only to Activated Alumina.
Activated alumina adsorbs certain gases and liquids.
While the alumina
itself is principally inert, the bead/powder may exhibit properties of
absorbed material.
(3)
. Inhalation:
Product may be mildly irritating to the nose, throat and
respiratory tract and may cause coughing and sneezing.
Excessive contact
with powder may cause drying of mucous membranes of nose and throat due to
absorption of moisture and oils.
May cause staining, metal fume fever,
pulmonary fibrosis and pneumoconiosis.
See "Other Health Effects" Section.
. Skin Contact:
This product may cause irritation due to abrasive action.
Excessive contact with powder may cause drying of the skin due to absorption
of moisture and oils.
May cause defatting, drying and cracking of the skin.
May cause staining.
. Skin Absorption:
Not likely to be absorbed through the skin.
. Eye Contact:
This product may cause irritation, redness and possible
damage due to abrasiveness.
Excessive contact with powder may cause drying
of mucous membranes of the eyes due to absorption of moisture and oils.
. Ingestion:
This product may cause mild gastrointestinal discomfort.
Ingestion of large amounts may cause intestinal obstruction.
Other Health Effects:
Effects (irritancy) on the skin and eyes may be
delayed, and damage may occur without the sensation or onset of pain.
Strict
adherence to first aid measures following any exposure is essential.
May cause staining, metal fume fever, pulmonary fibrosis and
pneumoconiosis.
Metal fume fever can be caused by inhalation of fumes formed
in the air from welding or heating the
metal.
Symptoms of metal fume fever
occur about 4 to 12 hours after exposure and usually last about 24 hours.
Recovery is complete with no apparent permanent disability.
The symptoms
resemble the "flu" and include:
sweating, shivering, headache, fever,
chills, thirstiness, muscle aches, nausea, vomiting, weakness and tiredness.
(4)
A metallic or sweet taste in the mouth, dryness or irritation of the
throat and coughing may occur at the time of exposure to the metal fumes.
(4)
Summary of Contents for TZ1050
