USER MANUAL
MODEL NO.: TZ730–1710
Rev. 08 – 14 September 2005
12
Danger!
Before any kind of maintenance or repair work is done, the dryer must
be depressurized and disconnected from the power source.
3.6 RESTARTING
Close the hand valve mounted at the bottom of the afterfilter
Slowly open the inlet isolation valve and pressurize the adsorption dryer up to the
regular operating pressure by keeping closed the shutoff valve mounted behind
the afterfilter
Switch DRYER ON.
NOTE: If the dryer is restarted after a long standstill, proceed as for an initial
start-up (see paragraph 3.3).
Summary of Contents for TZ1050
