80446339 Rev E
EN-33
EN
GRAPHING FOLDER
•
PAGES 1 THRU 5: INDIVIDUAL GRAPHS
Figure 47 : Individual Graphs
Graphing is only available on the Xe-145 controller.
Variable (Read Only)
Each page graphs one variable, displaying the variable
name and unit of measure in the top center of the page. The variables that
will be graphed on each of the five pages are selectable from page six. The
units of measure are selectable from the GENERAL SETTINGS folder.
Y-Axis (Read Only)
is auto-scaling.
X-Axis (Read Only -
The time duration is selectable from page six. The
sample rate varies, based on the selected duration.
The graph plots a minimum of 255 readings
•
PAGE 6 – GRAPHING SELECTIONS
Figure 48 : Graphing Selections
The selections for page one through five are organized sequentially in rows.
The top row has page one selections and the bottom row has page five
selections.
Variables
- include all analog inputs as well as some calculated variables. The
amount of variables will vary depending on the compressor type and the
options it has.
Duration
- selectable from the following five times
10 minutes
30 minutes
60 minutes
12 hours
24 hours
These times are fixed and cannot be changed.
MAINTENANCE FOLDER
•
PAGE 1: FILTER STATUS
Figure 49 : Filter Status
This page displays the following:
• Coolant Filter Status
• Separator Element Status
• Inlet Filter Status
• PAC Active
•
PAGE 2: MAINTENANCE STATUS
Figure 50 : Maintenance Status
This page displays the time until the compressor should be serviced.
•
PAGE 3: MAINTENANCE CONFIGURATION
Figure 51 : Maintenance Configuration
This page allows the user to set the service interval and to reset the counter
after the service has been performed.
RELEASED 01/Nov/2018 12:06:37 GMT
