USER MANUAL
Series HC
Reference No. 145 Final Rev 5
Page 27
September 2004
SECTION 3:
(Continued)
3.2.1
Main Screen
This is the main screen. This screen will be displayed upon initial startup or after an
alarm has been cleared. Using the up or down arrow keys and the enter key you may
select a screen to view.
3.2.2
Status
This screen will give you the dryer’s current status. The top line will tell you which tower
is onstream. The second line is the regeneration cycle in which the opposite tower
(regenerating) is in. This will toggle from
HEATING
to
STRIPPING
to
REPRESSURIZATION
to
COOLING
. If the optional dewpoint demand system (DPDS)
is installed, you may also see
STANDBY
below the current tower status.
The lower left hand corner gives the time remaining in the current regeneration cycle.
This starts counting down from 240 minutes (four hours). Note: When the dryer is in
DPDS Standby, the time remaining will read zero.
The lower right hand corner is another screen selector list. This list is the same as the
one on the MAIN screen, except it only displays one screen name at a time. Use the up
or down arrow key to select the screen name you would like to go to then press the
enter key.
