WebPOS iWP220/ iWP250_user guide
•
5/20
Copyright © 2009 Ingenico
9000002528 R11 000 01/926
All rights reserved
3.4.
FCC compliance
The FCC IDs for this model are:
•
iWP220 : XKBIWP220
•
iWP250 : XKBIWP250
3.4.1.
FCC Statement
This equipment has been tested and found to comply with the limits for a class B digital
device, pursuant to part of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna
•
Increase the separation between the equipment and receiver
•
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected
•
Consult the dealer or an experienced radio/TV technician for help
The device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions:
•
This device may not cause harmful interference
•
This device must accept any interference received, including interference that may
cause undesired operation of the device.
Part 68 of FCC Rules
This equipment complies with Part 68 of the FCC rules and the requirements adopted by
the ACTA. On the bottom
of this equipment is a label that contains, among other
information, a product identifier in the format US: AAAEQ##TXXXX. If requested, this
number must be provided to the telephone company.
3.4.2.
FCC RF Radiation Exposure Statement
ADVICE
This chapter concern only the model: iWP250 XKBIWP250
This transmitter must not be co-located or operating in conjunction with any other antenna
or transmitter.
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of
20 centimeters between the radiator and your body.
CAUTION:
The user is cautioned that any changes or modification not approved by
INGENICO could void user’s authority to operate the equipment.
