Operating Manual
Using a Desktop Charger
1)
Connect mains adaptor to charger, then
connect to mains power outlet and switch
on power.
2)
Red LED flashes - in ‘Standby Mode’
3)
Insert the battery into the charger
4)
Green LED flashes - battery is charging
5)
Green LED steady - battery is charged
Using a Vehicle Mount Charger (VMC)
1)
Install device (see installation guide)
2)
Insert thermal imager, with external battery
contacts facing in towards the charger, into
the charging station, ensuring the locator
pins are correctly aligned, and push until
the thermal imager ‘clicks’ into place
3)
Green LED steady - battery is charged
4)
Push the ‘Quick-Release’ lever down to
release the thermal imager.
Using a Vehicle Mount Twin-Charger (VMTC)
1)
Install device (see installation guide)
2)
Insert thermal imager and/or battery, with
external battery contacts facing in towards
the charger, into the appropriate charging
station and secure using the strap(s).
3)
Green LED steady - battery is charged.
Undo strap(s) and remove.
3.5
Preparing the AA Alkaline Battery Cassette
Information
It is recommended that the positive (+) end of each AA battery cell is inserted into the cassette
first, before pushing the negative (-) end into position.
© Copyright 2011, Infrared Systems Group Ltd.
Page 9 of 34
While ISG Infrasys has taken care to ensure the accuracy of the information contained herein, it accepts no responsibility for
the consequences of any use thereof and reserves the right to change the specification of goods without notice.
